蒸汽動能磨

時間：2018-09-05作者：四川眾金粉體設備有限公司瀏覽：78

**細**微粉碎機蒸汽動能磨原理：

蒸汽動能磨是利用過熱蒸汽經過同軸心噴嘴將顆粒加速、并進行碰撞粉碎，粉碎后的物料經過分級機分級，合格粉料進入后面的收集系統收集，不合格物料返回粉碎機繼續被粉碎。整個系統蒸汽保持在過熱狀態，生產在全干法下進行。

蒸汽動能磨加工**微粉煤灰、固硫灰的優勢

1.可以充分利用現有余熱所產生的蒸汽或低溫發電后的背壓蒸汽作為動力，能夠有效降低粉體加工成本；如現有蒸汽是未得到實際應用就排空，采用蒸汽動力磨后，粉體加工的成本將僅為氣流磨加工成本的1/5-1/8；節能優勢，在有條件的地方，用低級能源遠比用**能源節能顯著。

2.粉碎強度對比:常規氣流磨設計線速度 400m/s~600m/s，而蒸汽動能磨的粉碎強度可達到 1000m/s。

3.充分利用余熱，符合國家目前大力倡導節能減排政策的要求，易于獲得**科技資金的支持和國家科技獎勵；

4.蒸汽動力磨是物料與物料相互碰撞來進行粉碎的，設備磨損小，原料中如有大塊異物（螺栓、鐵塊等）進入設備不會對設備造成損壞，維修率低、易損件較少，設備維護費用低；

5.加工粉體粒度范圍寬，可加工10um的**細粉體，也可根據需要加工1～2um的**微粉體。

6.充分利用未被使用的過熱蒸汽，符合國家目前大力倡導節能減排政策的要求，易于獲得**科技資金的支持和國家科技獎勵；設備特點:

1.能耗低,可以充分利用現有余熱所產生的蒸汽或低溫發電后的背壓蒸汽作為動力，能夠有效降低粉體加工成本；如現有蒸汽是未得到實際應用就排空，采用蒸汽動力磨后，粉體加工的成本將僅為氣流磨加工成本的1/5-1/8；節能優勢，在有條件的地方，用低級能源遠比用**能源節能顯著。2.粉碎強度大，可獲得較細的粉體：過熱蒸汽的臨界速度高，粉碎力度大，易于獲得較細的**細粉，對某些物料可實現亞微米級甚至納米級粉體的加工,常規氣流磨設計線速度400m/s~600m/s，而蒸汽動能磨的粉碎強度可達到1000m/s。

3.蒸汽動力磨是物料與物料相互碰撞來進行粉碎的，設備磨損小，原料中如有大塊異物（螺栓、鐵塊等）進入設備不會對設備造成損壞，維修率低、易損件較少，設備維護費用低；

4.在加工易燃易爆粉體（如：煤粉/石油焦等）過程中安全性好，物料是在全過熱蒸汽中粉碎，因而不存在爆炸的危險；且加工后的粉體可保持在40-80℃的溫度，有利于提高燃燒效率；

5.加工粉體粒度范圍寬，根據需要可加工100目～12500目的粉體。

6.充分利用熱電廠低品位過熱蒸汽作為動力，實現低成本，規?；?*細粉體加工，符合國家目前大力倡導節能減排政策的要求，易于獲得**科技資金的支持和國家科技獎勵。

應用領域典型物料有：

粉煤灰、固硫廢渣、鈦白粉、煤粉、石油焦、炭黑、炭素、高爐渣、鋼渣、石墨、云母、滑石、石英、方解石、重晶石、硅藻土、氫氧化鋁/鎂、金屬氧化物等一切耐溫的物料。

現主要應用領域有:

電廠粉煤灰/固硫廢渣，玻璃廠石油焦粉/煤粉，鋼廠高爐渣/鋼渣，炭素廠煅后焦/**細石墨，非金屬礦行業/**微粉體材料等。

 
Principle of kinetic energy grinding of steam:

Steam mill is using superheated steam through the coaxial nozzle, and will accelerate the particle collision crushing, crushing the material after grading, collect the powder into the back of the system of qualified, unqualified material return to mill crushed. The steam of the whole system remains overheated and the production is carried out under full dry process.

Advantages of steam kinetic energy grinding for ultrafine fly ash and sulfur fixing ash:

1. can make full use of existing waste heat generated by steam or low temperature power generation after the back pressure steam as the driving force, can effectively reduce the powder processing cost; if the existing steam is not applied on emptying, powered by steam after grinding, powder processing costs will only flow grinding cost 1/5-1/8;Energy saving advantages, in the conditional place, the use of low-grade energy is far more significant than the use of advanced energy saving.

2. crushing strength contrast: conventional gas mill design line speed of 400m/s~600m/s, while the steam kinetic energy mill crushing strength can reach 1000m/s.

3. the full use of waste heat, in line with the current state vigorously advocated energy-saving emission reduction policy requirements, easy access to government funding for science and technology and national science and technology incentives;

4. steam power grinding material and the material is crushed to collide with each other, small wear equipment, such as a large foreign body in raw materials (iron bolts, etc.) into the device will not cause damage to the equipment, low maintenance rate, few wearing parts, low maintenance cost;

5. the processing powder size range is wide, 10um superfine powder can be processed, but also can be processed according to the needs of 1 ~ 2um of ultrafine powder.

6. make full use of not used superheated steam, in line with the current state vigorously advocated energy-saving emission reduction policy requirements, easy access to government funding for science and technology and national science and technology incentives;

Equipment features:

1.low energy consumption, can make full use of the existing waste heat generated by steam or low temperature power generation after the back pressure steam as the driving force, can effectively reduce the powder processing cost; if the existing steam is not applied on emptying, powered by steam after grinding, powder processing costs will only flow grinding cost 1/5-1/8; energy saving the advantage, in some places, with lower energy than using advanced energy saving energy.

2. crushing strength, can obtain finer powder: critical velocity of superheated steam, crushing strength, easy to obtain ultrafine powder more fine, can realize the processing of submicron or nanometer powder of some material, conventional jet mill line design speed of 400m/s~600m/s, and the steam mill crushing strength of kinetic energy can reach 1000m/s.

3. steam power grinding material and the material is crushed to collide with each other, small wear equipment, such as a large foreign body in raw materials (iron bolts, etc.) into the device will not cause damage to the equipment, low maintenance rate, few wearing parts, low maintenance cost;

4. in the processing of flammable and explosive powder (such as coal / coke) in the process of safety, material is crushed in the superheated steam, so there is no danger of explosion; powder and processed can be maintained at a temperature of 40-80 DEG C to improve combustion efficiency;

5. the processing powder size range is wide, according to the needs of processing 100 mesh to 12500 powder.

6. make full use of low grade thermal power plant superheated steam as the driving force, low cost, super fine powder processing scale, conform to the state is vigorously promoting energy-saving emission reduction policy requirements, easy to obtain government funding of science and technology and support of the national science and technology award.

Typical materials used in the application field are:

Fly ash, sulfur slag, titanium dioxide, coal, petroleum coke, carbon black, carbon, blast furnace slag, steel slag, graphite, talc, mica, quartz, calcite, barite, diatomite, aluminum hydroxide, magnesium / metal oxides were all temperature resistant material.

The main areas of application are:

Power plant, fly ash / sulfur slag, glass plant, petroleum coke powder / coal powder, blast furnace slag / steel slag, carbon plant, calcined coke / superfine graphite, non-metallic mineral industry / ultra-fine powder materials.


四川眾金粉體設備有限公司專注于粉碎機,分級機,沖擊磨,拋射磨,動能磨等

• 詞條

  詞條說明

• 蒸汽動能磨

  **細**微粉碎機蒸汽動能磨原理： 蒸汽動能磨是利用過熱蒸汽經過同軸心噴嘴將顆粒加速、并進行碰撞粉碎，粉碎后的物料經過分級機分級，合格粉料進入后面的收集系統收集，不合格物料返回粉碎機繼續被粉碎。整個系統蒸汽保持在過熱狀態，生產在全干法下進行。 蒸汽動能磨加工**微粉煤灰、固硫灰的優勢 1.可以充分利用現有余熱所產生的蒸汽或低溫發電后的背壓蒸汽作為動力，能夠有效降低粉體加工成本；如現有蒸汽是未得到實際應用

• 蒸汽雙噴扁平**細**微粉碎機

  ZJ**細**微粉碎機蒸氣雙噴扁平氣流粉碎機是我公司根據鈦白粉的粉碎要求，即粒度分布窄、夾雜增加少、分散性好；以及鈦白粉物料粘度高、流動性差、粒度細且容易附壁等特性，開發出的鈦白粉較終粉磨**汽流粉碎機。 目前國內外鈦白生產廠家均選用具有自分級功能的扁平式（亦稱水平圓盤式）氣流粉碎機作為鈦白粉的較終粉碎設備；并且使用過熱蒸汽為粉碎工質，在高溫狀況下粉碎，可提高鈦白粉的應用分散性，增加鈦白粉的流動性。