澳大利亞較新紐扣電池認證要求

時間：2021-07-27作者：深圳市華商技術有限公司瀏覽：19

澳大利亞強制性安全和信息標準草案規定了包含紐扣和幣形電池以及紐扣和幣形電池本身的消費品的要求。




包含紐扣電池和幣形電池的消費品安全標準規定了使用/包含紐扣/幣形電池的消費品的要求，其設計應避免兒童接觸紐扣/幣形電池，包括電池應牢固，在正常和可預見的使用和濫用條件下不會釋放電池。

紐扣電池和幣形電池的安全標準規定了紐扣電池和幣形電池的兒童防護包裝要求。

含有紐扣電池和幣形電池的消費品信息標準規定了未包裝產品的包裝、說明和零售點的警告和信息要求。

紐扣電池和幣形電池的信息標準規定了紐扣電池和幣形電池包裝上的警告和信息要求以及某些幣形電池的標記要求。







The draft Australian mandatory safety and information standards specify requirements for consumer goods containing button and coin cell batteries and button and coin cell batteries themselves.




The safety standard for consumer goods containing button and coin cell batteries specifies requirements for consumer goods that use/contain button/coin cell batteries to be designed to eliminate child accessibility to the button/coin cell batteries, including that the batteries shall be secure and not release the batteries during normal and foreseeable use and abuse conditions.

The safety standard for button and coin cell batteries specifies requirements for child-resistant packaging of button and coin cell batteries.

The information standard for consumers goods containing button and coin cell batteries specifies requirements for warnings and information on packaging, instructions and at the retail point of sale for unpackaged products.

The information standard for button and coin cell batteries specifies requirements for warnings and information on the packaging of button and coin cell batteries and for markings on certain coin cell batteries.




Relevant documents:




The draft Australian mandatory safety standard for consumer goods containing button and coin cell batteries permits suppliers to comply with one of the following industry standards (or sets of industry standards) deemed to have acceptable button/coin cell battery security and compliance testing requirements.




IEC 62368-1: 2018 Audio/video, information and communication technology equipment – Part 1: Safety requirements

AS/NZS 62368.1:2018 Audio/video, information and communication technology equipment – Part 1: Safety requirements

AS/NZS 60065:2018 Audio, video and similar electronic apparatus-Safety requirements

IEC 62115:2017 Electric toys – Safety – clause 13.4.1, 13.4.2, 13.4.6 and ISO 8124-1:2018 Safety of toys – Part 1: Safety aspects related to mechanical and physical properties

AS/NZS 62115:2018 Electric toys – Safety – clause 13.4.1, 13.4.2, 13.4.6 and AS/NZS 8124.1:2019 Safety of toys – Part 1: Safety aspects related to mechanical and physical properties

AS/NZS 60598.1:2017 Luminaries Part 1: General requirements and tests

UL 4200A UL Standard for Safety for Products Incorporating Button or Coin Cell Batteries of Lithium Technologies

The draft Australian mandatory safety standard for button and coin cell batteries permits suppliers to comply with one of the following industry standards to demonstrate that the child-resistant packaging requirements have been met.

IEC 60086-4:2019 Primary Batteries Part 4: Safety of lithium batteries

AS 5808-2009 Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

EN 862:2016 Packaging - Child resistant packing - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

ISO 28862:2018 Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

AS 1928-2007 Child-resistant packaging - Requirements and testing procedures for reclosable packages

ISO 8317-2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages

USA: 16 CFR §1700 Poison Prevention Packaging Standard

The mandatory safety standard for button and coin cell batteries applies child-resistant packaging requirements that deviate from IEC 60086-4 by requiring child-resistant packaging to:

button and coin cell batteries of lithium chemistry of all sizes

button batteries of a chemistry other than lithium with a diameter of 16mm or above.

The mandatory information standard for consumer goods containing button and coin cell batteries applies warning requirements that deviate from certain industry standards that specify button/coin cell battery related warning requirements by requiring that the front panel of the packaging of the consumer goods be marked with an internationally recognised safety alert symbol.




Proposed date of adoption: The mandatory safety and information standards are subject to Australian Government consideration and approval.

Proposed date of entry into force: The proposed requirements will be mandatory 18 months after the mandatory safety and information standards commence.




深圳市華商技術有限公司專注于UL認證,SRRC認證,FCC認證等

• 詞條

  詞條說明

• USB空氣凈化器申請CE、ROHS、FCC費用

  國內市場項目：強制性3C認證，自愿性CQC認證，3C派生京東，天貓，買保險等CNAS，CMA雙章ISO9001，ISO14001，ISO45001三體系用于招標投標的企業榮譽證書，企業執行標準備案國外市場項目：歐盟：CE-EMC，CE-LVD，CE-RED，CE-EN71，ROHS，REACH美國：FCC，F(xiàn)CC-ID，CPC，加州65，F(xiàn)DA注冊，UL日本：PSE，METI備

• 歐盟發布EN 60204-1:2018新版本標準

  一、歐盟機械標準E**0204-1? ? ?新的機械電氣安全標準EN 60204-1：2018-機械的電氣設備-*1部分：一般要求較新機械安全：電氣技術方面”，IEC修訂了重要標準EN 60204-1：2018由于是協調標準，這意味著它符合兩部歐盟法規：機械指令2006/42/EC和低壓指令2014/35/EC。?? ? EN 60204

• 鋰電池需要做的認證 ？

  鋰離子安全和認證測試? ? ? 安全和認證測試涉及鋰離子電池的處理和充電條件，以及針對較端溫度，電壓和電流測試電池，測試包括IEC / EN 62133，UL 62133，CSA E62133，UL 1642，UL 2054，UL 2271和UL 2272（自平衡滑板車電氣系統研究概要），UL 2272專門適用于電動自平衡滑板車（也稱為懸浮滑板）的電氣傳動系統- 包括

• EN88燃?xì)馄骶邏毫φ{(diào)節器CE-PED指令認證

  EN88燃?xì)馄骶邏毫φ{(diào)節器CE-PED指令認證EN88標準介紹：EN88是燃?xì)馄骶叩膲毫φ{(diào)節器和相關安全裝置 - * 1 部分：入口壓力高達 500 毫巴的壓力調節器CE認證標準。EN88歐洲標準規定了壓力調節器和氣動燃?xì)?空氣比壓力調節器（零壓力調節器作為一種特殊類型的氣動燃?xì)?空氣比壓力調節器）的安全、結構和性能要求，旨在與燃?xì)馊紵鳌⑷細馄骶吆皖愃朴猛?，以下稱為“壓力調節器”。用于**控制標