CPU 1513F-1 PN

時間：2022-03-25作者：上海騰希電氣技術有限公司瀏覽：254

6ES7513-1FL02-0AB0

SIMATIC S7-1500F, CPU 1513F-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 450 KB FOR PROGRAM AND 1.5 MB FOR DATA, 1. INTERFACE: PROFINET IRT WITH 2 PORT SWITCH, 40 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY







The CPU for standard and fail-safe applications with medium/high requirements for program/data storage in the S7-1500 Controller product range

Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849

High processing speed for binary and floating-point arithmetic

Used as central PLC in production lines with central and distributed I/O

Supports PROFIsafe in centralized and distributed configuration 

PROFINET IO IRT interface with 2-port switch

PROFINET IO controller for operating distributed I/O on PROFINET

PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET IO controller

Isochronous mode

Note:
SIMATIC Memory Card required for operation of the CPU

應用

The CPU 1513F-1 PN is the CPU with a medium to large program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as a 2-port switch, enabling a linear topology to be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLCopen blocks.

設計

The CPU 1513F-1 PN has:

A powerful processor:
The CPU achieves a command execution time as low as 40 ns per binary command.

Extensive work memory:
450 KB for program, 1.5 MB for data

SIMATIC Memory Cards as load memory;
permit additional functions such as Datalog and Archive Flexible

Expansion capability:
single-tier configuration with max. 32 modules (CPU + 31 modules)

Display with functions for

Display of overview information such as station name, higher level designation, location designation, etc.

Showing diagnostic information

Showing module information

Showing display settings

Setting IP addresses

Setting date and time

Switching the operating mode

Resetting the CPU to factory settings

Disabling/enabling the display

Enabling of protection levels

Display of safety mode, overall signature and date of the last download with signature change

PROFINET IO IRT interface for connecting distributed I/O via PROFINET

Supports PROFIsafe in centralized and distributed configuration

功能

Performance

Faster command processing, depending on the CPU type, language extensions and new data types

Even shorter response times of the CPUs due to considerably faster backplane bus

Powerful network connection:
Each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.

Integrated technology

Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)

Support of speed-controlled and positioning axes as well as external encoders

Trace functions for all CPU tags, both for diagnostics in real time and for sporadic error detection

Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality

Security Integrated

Password-based know-how protection against unauthorized read-out and modification of program blocks

Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted in the CPU.

4-level authorization concept:
Communication to operator panels can also be restricted.

Manipulation protection:
The controller recognizes changed or unauthorized transmissions of the engineering data.

Design and handling

Display of overview information:
E.g. Station name, plant designation, location identifier, etc., diagnostic information, module information, display settings.

Possible operations on the display:
Set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.

Integrated system diagnostics

System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, operator panels and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.

Integrated in the firmware of the CPU, no special configuration is required

SIMATIC Memory Card (required for operation of the CPU)

Used as plug-in load memory or for updating the firmware.

Also for storing additional documents or csv files (for recipes and archives)

Creation of data blocks for storage/reading of data via SFCs of the user program

Datalog (archives) and recipes

Storage of csv files for recipes and archives on the SIMATIC Memory Card;
easy access to plant-relevant operating data using Office tools and via web server

Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the PLC)

Programming of the standard program section

Programming as of STEP 7 V12 SP1

Programming of the fail-safe program section

Programming of the safety-related program section with the "STEP 7 Safety Advanced" option package. STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.





上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 6GK7542-1AX00-0XE0

  用作 PROFINET IO 控制器的通信模塊，用于將 SIMATIC S7-1500 連接至 PROFINET 網絡。CM 1542-1 支持以下通信務：編程器/OP 通信S7 通信開放式通信 (SEND/RECEIVE)PROFINET 通訊IT 通信；通過訪問 S7-1500 系統的 Web 服務器實現 Web 診斷功能優勢由于支持介質冗余 (MRP)，可實現高水平的工廠利用率通過基于 We

• VRRPv3地址概述

  地址概述概述此頁面顯示虛擬路由器監視的 IPv4 地址。每個虛擬路由器較多可監視 10 個 IPv4 地址。設置該表格包括以下列：Interface顯示用作虛擬路由器的接口。VRID顯示此虛擬路由器的 ID。Number of Addresses顯示 IPv4 地址的數量。Associated IP Address (1) ...Associated IP Address (10)顯示該虛擬路由器

• 6ES7511-1CK01-0AB0

  S7-1500 控制器產品系列中帶集成數字量和模擬量輸入和輸出的緊湊型 CPU帶集成技術功能，比如高速計數器 (HSC)、頻率測量功能、周期持續時間測量或步進電機控制、脈寬調制、頻率輸出等適用于對程序范圍和處理速度具有中等要求的應用在具有集中式和分布式 I/O 的生產線上作為集中式 PLC 使用PROFINET IO IRT 接口，帶 2 端換機PROFINET I/O 控制器，用于在 PROFI

• CoS 端口重映射

  CoS 端口重映射發送時更改**級在此頁面上，可以根據接收幀時的**級，更改發送幀時所用的**級。顯示框說明該頁面包含以下框：CoS 重映射 (CoS Remap)根據表 2 啟用或禁用根據已更改**級發送的幀。表 1 包含以下列：端口 (Port)說明設置對于表 2 的所有端口都有效。**級 0 - 7列中的**級表示接收幀時所用的**級。-?0 - 7選擇發送幀時所用的**級。-&n