Overview of isochronous mode

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：136

Overview of isochronous mode



Introduction

The SIMATIC Drive Controller supports isochronous mode for the following clock systems:

PROFINET IO interface X150

PROFIBUS DP interface X126

Technology I/Os X142

SINAMICS Integrated with PROFIdrive Integrated (always isochronous)

You can operate the clock systems separately or coupled on an isochronous basis.

Exception: Isochronous coupling of the PROFIBUS DP interface is not possible.

Independent isochronous mode

If you want to operate the clock systems separately in isochronous mode, configure a cycle time for each clock system and assign the clock systems to different process images, for example:

SINAMICS Integrated → PIP OB Servo [OB 91]

PROFIBUS DP interface X126 → PIP 1 of isochronous mode interrupt OB [OB 6x]

The clock systems are in this case not isochronous to each other.

提示 You cannot operate the X142 technology I/Os in isochronous mode separately from SINAMICS Integrated. If you want to operate technology I/Os X142 and SINAMICS Integrated in isochronous mode simultaneously, always set coupled isochronous mode.




Coupled isochronous mode

In coupled isochronous mode, the relevant clock systems use a shared system clock.

The leading clock system provides its own system clock to the other clock systems.

The following table shows the possible combinations for coupled isochronous mode on the SIMATIC Drive Controller. The leading clock system for each combination is indicated.

列表: Possible combinations for coupled isochronous mode

PROFINET IO interface X150	Technology I/Os X142 (local send clock)	SINAMICS Integrated (PROFIdrive Integrated)	PROFIBUS DP interface X126
X (leading)	X	X	-
X (leading)	-	X	-
X (leading)	X	-1	-
-	X (leading)	X	-

¹ SINAMICS Integrated is not configured.




You configure coupled isochronous mode in STEP 7; see Setting the clock system.

提示 Isochronous coupling of the PROFIBUS interface with other clock systems is not possible. If you want to expand the drive configuration limits with distributed drive systems, connect those distributed drive systems over the PROFINET IO interface X150. Only the PROFINET IO interface X150 can be connected isochronously alongside the MC Servo to the clock system of SINAMICS Integrated and the X142 technology I/Os.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 防止G120變頻器參數被誤修改的幾種辦法(二

  今天再給大家介紹*三個方法：G120的專有技術保護功能三：通過STARTER軟件激活G120的專有技術保護功能G120變頻器的專有技術保護功能，不僅能夠保護我們設置的參數不被修改，還可以保護我們的參數不被別人拷貝。下面，我們將通過以下幾個方面來講述如何通過STARTER軟件激活G120變頻器的專有技術保護功能。1.創建不屬于專有技術保護范圍的特列清單為了方便G120在以后的維護的方便，在激活專有技

• S7-1500 CPU操作模式轉換

  操作模式轉換概述下圖顯示了 S7-1500 CPU 的操作模式和操作模式轉換：下表列出了操作模式改變的條件：編號操作模式轉換條件①POWER ON → STARTUP接通電源后，發生以下情況時，CPU 將轉入“STARTUP”模式：啟動類型設置為“暖啟動”，且硬件配置與程序塊一致。將清空非保持性存儲器中的內容，同時將非保持性 DB 的內容復位為裝載存儲器的初始值。同時保留保持性存儲器和保持性 DB

• 輸出（頻率測量）

  輸出（頻率測量）輸出功能流程“輸出功能流程”(Output function course) 下拉列表具有以下選項供您選擇：不比較該輸出與正常輸出的切換方式相同。SFB 輸入?yún)?shù) MAN_DO 和 SET_DO 處于未激活狀態。狀態位 STS_DO 保持復位狀態。**出限制時置位當測量頻率**上限或**下**，將置位輸出。**出下**置位當測量頻率**下**，將置位輸出。**出上**置位當測量頻率**上

• 啟用產品支持

  啟用產品支持對于硬件目錄中的每個設備，用戶可以選擇顯示在西門子工業在線支持網站中存儲的附加信息。 默認情況下會禁用該功能。 以下介紹了如何啟用該功能。要求TIA Portal 必須能夠訪問 Internet。步驟為了能夠訪問西門子工業在線支持網站，請按以下步驟操作：在“選項”(Options) 菜單中，選擇“設置”(Settings) 命令。在區域導航中打開“硬件配置”(Hardware conf