Configuration of digital inputs/outputs (X142)

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：80

Configuration of digital inputs/outputs (X142)



You configure the required digital input/outputs and operating modes over interface X142.

Overview of supported operating modes

You can configure the following operating modes for the individual channels of the X142 interface:

列表: Overview of operating modes

Operating mode of X142 I/Os (8 channels)	Functionality	Use with technology objects (TOs)	Use via I/O area (without TO)	Isochronous mode
DI	Digital input Input delay (1 μs/125 μs) Hardware interrupt (optional) Hardware interrupt at rising and/or falling edge	Hardware limit switch for positioning and synchronous axes	No OB restrictions	Optional
DQ	Digital output	Output cam Cam track	No OB restrictions	Optional
Timer DI	Acquisition of the switching time of a digital input ** with up to two edges per application cycle (e.g. for use as measurement sensing input)	Measuring input (OB 91 required)	OB 91/OB 6x required	Required
Timer DQ	Precisely timed output of a digital output ** with up to two edges per application cycle (e.g. for use as an output cam output)	Output cam (OB 91 required) Cam track (OB 91 required)	OB 91/OB 6x required	Required
Oversampling DI	Acquisition of 32 states of a digital input ** at equal intervals per application cycle	---	OB 91/OB 6x required	Required
Oversampling DQ	Output of 32 states of a digital output ** at equal intervals per application cycle	---	OB 91/OB 6x required	Required
Event/period duration measurement	Measurement of number of edges and period duration (e.g. for simple speed measurement with hole mask and light barrier)	---	OB 91/OB 6x required	Required
Pulse width modulation PWM	Output of a configurable pulse-pause ratio with a configurable frequency	---	No OB restrictions	Optional

Procedure

Select the Device configuration entry in the project tree under the CPU. The device view opens.

In the device view, click the DI/DQ 8x24VDC [X142] interface. You can now edit the configurable properties under Properties in the Inspector window.

You can find an overview of all channels and your selected settings under Channel parameters.


圖片: Channel parameters

To configure your selected channels, click on the arrow beside the channel number.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• S7-1200運動控制

  2.1.1 S7-1200 V3.0 固件S7-1200 CPU固件版本從V3.0開始已經支持較多4路PTO輸出，以CPU1214C（6ES7214-1AG31-0XB0）為例，其CPU本體支持4路PTO輸出，其中PTO 1、PTO 2的頻率范圍為 2 Hz ≤ f ≤ 100 kHz，PTO 3 、PTO 4的頻率范圍為2 Hz ≤ f ≤ 20 kHz。2.1.2 S7-1200 V4.0 固

• 1200定制 Web 頁面的語言切換

  定制 Web 頁面的語言切換要求HTML 頁面包含在預定義的語言文件夾中，例如，帶有德語文本的 HTML 頁面位于“de”文件夾中，帶有英語文本的 HTML 頁面位于“en”文件夾中。語言切換概念語言切換基于一個名為“siemens_automation_language”的預定義 cookie。 如果此 cookie 設置為值“de”，在則下一次 Web 頁面請求或 Web 頁面較新時，Web

• 建立 TIA Portal 與 Teamcenter 間的連接

  建立 TIA Portal 與 Teamcenter 間的連接要使用 TIA Portal Teamcenter Gateway，需要使用有效的 Teamcenter 用戶信息登錄特定的“Teamcenter 服務器”。要求需滿足以下要求：TIA Portal 已啟動。操作步驟要建立 TIA Portal 與 Teamcenter 間的連接，請按以下步驟操作：在 TIA Portal 的主菜單中，

• 導出文本列表

  導出文本列表用戶自定義文本列表可導出進行編譯，然后再重新導入。這些文本將導出為一個擴展名為“.xlsx”的 Office Open XML 文件。該文件可通過 Microsoft Excel 或其它電子數據表程序進行編輯。提示導出限制請注意，系統定義的文本列表不能導出。要求項目已打開。項目中包括至少一個設備。項目中已創建有文本列表。文本列表編輯器已打開。操作步驟要導出文本列表，請按以下步驟操作：在