安科瑞IoT電能管理系統性解決方案在馬來西亞某工廠的應用

時間：2021-12-16作者：江蘇安科瑞電器制造有限公司瀏覽：108

1. 應用場景Application Scenario

對工廠的三相用電設備的用電量進行采集并上傳至系統， 從而使用戶能夠?qū)崿F(xiàn)在PC上就能通過IoT EMS系統查看設備用電情況。

Customers need to collect the basic energy consumption data and upload it to management system so that they can realized real-time and remote data monitoring using their PC.

2. 技術選型 Technical Selection

2.1三相回路電壓為415Vac L-L，額定電流不**過80A AC，三相四線接線，電表方面選型三相帶RS485（MODBUS-RTU）通訊的電表ADL400。  

Rated voltage of 3-phase monitoring circuits is 415Vac L-L while the rated current is below 80A AC, thus selection of metering devices will be ADL400 3-phase energy meter with RS485 communication of MODBUS-RTU protocol

 

2.2工廠經確認后WiFi覆蓋條件較好，頻段為2.4GHz，方便提供220Vac供電，網關選用AWT100-WiFi搭配POW模塊。支持廣播自動抄表以便后續下行設備的添加。該網關上行為4GHz WiFi，采用MODBUS-RTU over TCP的透?jìng)魍ㄓ崊f(xié)議。下行為RS485通訊，采用MODBUS-RTU協議，從而與ADL400配合對數據進行上傳至云服務器通向系統。

After discussing with the customer, factory is with stable 4GHz WiFi coverage and **,and a power supply of 220Vac is preferable. So, for the gateway parts, we select AWT100-WiFi which own auto-broadcasting function that can ease the later adjustment with subsequent ADL400. Also, AWT100-WiFi is paired with AWT100-POW power module.Other than that, since AWT100-WiFi is with upstream of 2.4GHz WiFi using MODBUS-RTU over TCP protocol and downstream of RS485 using MODBUS-RTU protocol to be paired with ADL400 for energy consumption data uploaded to cloud server and finally to the IoT System.

 

2.3測試階段服務器使用我司已經租用的亞馬遜云服務器以節省客戶預算。

  For pilot project phase, cloud server is highly recommended to use our company’s cloud server which has been rent on Amazon to save the customers’ budget on testing phase.

 

2.4根據需求系統選用IoT EMS系統，并提供3個月試用以便客戶測試。

According to the request, IoT Energy Management System will be the most appropriate one and can provide 3-month free trial for testing use.

 

3. 初期方案架構Pilot Project Solution Structure

 

 

4. 后期方案方向 Plan after Pilot Project

若初期方案測試成功，后期方案方向?yàn)椋?/span>

If pilot project proved to be successful, later plan should be as below:

4.1云托管方案：綜合考慮云服務器租用成本以及點位數量不多的情況，云方案推薦為系統軟件選用托管，云服務器依舊使用我司的云服務器。硬件設備層*改動，只需后續增訂ADL400三相電能表，若點位數量需求較多，根據情況配套增訂AWT100-WiFi網關。

   Cloud Hosting Service Solution: Considering about the comprehensive cost of renting the cloud server and the amount of monitoring circuits, deployment of cloud IoT Energy Management System should be paired with hosting service. In this situation, customer don’t need to afford the rent of cloud server and will use our own cloud server. Also, for the hardware of this solution, no change need be done just like in the pilot project solution structure. Customer only need to order more ADL400 3-phase energy meter and maybe paired AWT100-WiFi gateway according to the number of subsequent request.

   

4.2本地買斷方案：若客戶對數據保密性比較有想法，后期推薦方向?yàn)镮oT系統買斷服務，服務器架設本地服務器并搭配工業交換機與UPS電源。硬件設備層電表依舊推薦ADL400，特殊型號ADF400L不推薦使用，原因是在三相四線接線為直通式接線而非互感器接入時，ADF400L的測量模塊需求數量較多，無法減少成本。網關方面根據后期點位數量增配AWT100-CE或者APort100.

   Local Buy-out Service Solution: If request from customers for data safety and Confidentiality is much more higher. The buy-out service of IoT Energy Management System to be paired with a Local Server will be the best choice. Yet the solution need to do a lot of change in hardware like. First, deploying of local server need to be paired with industrial switch and UPS. Second, for energy meter, ADL400 is still more recommendable.Since the special module, ADF400L Multi-circuit energy meter with built-in Ethernet communication won’t save much budget on the application of 3-phase wiring via direct connection instead of via CTs. At last, gateway need to be changed from AWT100-WiFi to AWT100-CE or Aport100 according to the amount of subsequent request.

 

5. 后期方案架構 (僅指采用本地方案的情況下) Late-stage Solution Structure （For local solution only）

 

相關產品：多功能電表、導軌式智能電表、無線電表、4G電表、NB電表、電機保護器、馬達保護器、線路保護器、預付費電表、無線測溫、電房**系統、配電室綜合監控系統、電能管理系統、能耗管理系統、用電管理系統、能源信息化系統、預付費管理系統



江蘇安科瑞電器制造有限公司專注于導軌式智能電表,NB電表,無線測溫,無線電表,4G電表,安科瑞等

• 詞條

  詞條說明

• 攀枝花銀泰城北地塊電力監控系統的研究與應用

  摘要：采用微機保護和多功能電力儀表、采集變電所內10KV高壓柜以及0.4KV低壓配電回路現場的各種電參量和開關信號。系統采用現場就地組網的方式，組網后通過現場總線通訊并遠傳至后臺，通過Acrel-2000型電力監控系統實現配電所配電回路用電的實時監控和管理。關鍵詞：商業建筑；變電所 ;Acrel-2000;電力監控系統;0?概述攀枝花銀泰城北地塊項目位于攀枝花市仁和區攀枝花大道南段與云盤

• 安科瑞預付費云平臺系統在某學校的應用

  摘要：介紹正商職業學校預付費云平臺系統，采用智能預付費儀表進行智能預付費遠程控制。系統采用現場網關就地組網的方式，組網后通過網絡將數據遠傳云服務器后臺，通過AcrelCloud-3200預付費云平臺系統實現配電回路用電的收費和能效管理。 關鍵詞：智能電力儀表;預付費電能表；能效管理；預付費云平臺系統 0 ?概述 鄭州正商職業學院位于鞏義市米河鎮北部草店村，計劃總投資12億元，規劃總用地

• 信號隔離器在水處理控制系統的應用

  摘要：水處理控制系統中，其控制、監測模塊的非電量模擬量傳感器采用信號隔離器的接線方式合理地解決了相關模擬量傳感器供電電源安全和相對獨立的問題，保證了監測模塊的電源、模擬量采集模塊和輸出模塊的相對隔離，降低了可能會造成的模板燒毀損壞的概率，提高了模擬信號測量精度、抗電磁干擾能力，同時也解決因某些現場非電量安裝條件的限制問題。 關鍵詞：信號隔離器；水處理；模擬量傳感器； 0：概述 在水處理監控自動化

• 電機保護器如何保護電機被燒毀

  電機保護器如何保護電機被燒毀?????實際應用中，能引起電機燒毀的原因很多，大概可以分為以下幾大類：(1)各種原因引起的電機過載，電流過大;(2)電壓太低或太高、相不平衡或缺相(包括接觸器故障引起的缺相)引起的電流不平衡;(3)制冷劑泄漏或管路問題引起的回氣壓力過低，電機冷卻不足;(4)繞組絕緣層受損或制冷劑含水量過高，短路燒毀等。理論上，過載保護