Acrel anti-backflow meter apply in the Philippines photovoltaic project

時間：2022-10-10

朱鹍

安科瑞電氣股份有限公司上海嘉定

1.Background

With the development of photovoltaic industry, the capacity of village-level transformers and industrial power transformers and the installed capacity of photovoltaic projects are saturated in some areas.The power grid company requires the photovoltaic grid-connected system to be a non-backflow current generation system, which means that the electricity generated by the photovoltaic grid-connected system is consumed by the local load, and the excess electricity is not allowed to be sent to the upper power grid through the low-voltage distribution transformer in reverse direction.

Photovoltaic inverter in photovoltaic components will produce direct current into alternating current (ac), has the dc component and harmonic mixing, unbalanced three phase current, output power of uncertainty, such as the current basic didn't take effective management measures, therefore, when there is power to the utility grid, will generate harmonic pollution to power network, easy cause power grid voltage fluctuation and flicker, etc.,If there are many such power sources to transmit electricity to the grid, the power quality of the grid will be seriously degraded.Therefore, this kind of photovoltaic power generation system must be equipped with anti-backflow current facilities to prevent the occurrence of reverse power.

When the photovoltaic power generation is greater than the load demand, the inverse power will be generated.So we need instruments to determine that Inverter has power output, and then by the instrument through RS485 communication ** and inverter data interaction, adjust the inverter output power, so that its output power and power balance.

2.Project Overview

A photovoltaic power generation company in the Philippines contacted our company to look for anti-backflow current meters. After proper connection agreement, we will purchase ACR10R-D16TE from our company.

3.Anti-backflow detection meter

When the photovoltaic power generation is greater than the load demand, reverse power will be generated. Therefore, we need an meter to determine that the inverter has over-power output, and then the meter sends a ** through RS485 communication to interact with the inverter data to adjust the output power of the inverter to balance the output power and the electrical power.

4.Function

5.Wiring

6.Typical Connection

Bibliography

1.Solutions for enterprise micro-grid system

朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向為企業能源管控

15000353138

詞條
詞條說明
簡析電動汽車的有序充電管理及其對配網的影響分析
摘要：電動汽車以無序充電方式接入配電網時與網內基礎用電負荷疊加，會形成峰上加峰的現象，不利于配電網的穩定運行。針對上述問題，對私家車充電負荷進行建模，采用蒙特卡羅抽樣模擬電動汽車無序行為下的充電負荷曲線。然后提出一種新型的多時段動態充電價格機制，引導車主有序充電，并以配電網負荷波動比較小為目標函數，優化電動汽車充電行為。比較后在IEEEE3節點配電網中，分別分析有序和無序充電負荷并網時電動汽車充電
安科瑞智能照明控制系統在新樂匯項目的設計與應用
安科瑞智能照明控制系統在新樂匯項目的設計與應用朱鹍安科瑞電氣股份有限公司摘要：本文介紹大唐不夜城新樂匯項目，采用Acrel-BUS智能照明控制系統對全科醫生培養基地樓等公共部分照明回路的通斷進行智能控制，系統組網為KNX總線通訊，設計采用就地智能面板控制及通過IP網關接入Acrel-iLightControl智能照明控制系統，在計算機端集中控制與監控管理。?關鍵詞：公共建筑；智能照明控制
淺談智能集成電容器在箱式變電站中的應用
朱鹍安科瑞電氣股份有限公司? ?上海嘉定 201800摘要：隨著我國對電網建設的不斷投入以及電網改造力度的加大，電網末端變配電設備越來越多，智能集成電力電容器因其具有高度集成而小型化、過零投切耗能低、補償效果好等特點，在箱式變電站無功補償裝置中得到了很好應用。?關鍵詞：智能集成電力電容器；高度集成；小型化；箱式變電站。?引言： ??&nb
電氣火災監控系統在德令哈市新能源有軌電車線工程的應用
朱鹍安科瑞電氣股份有限公司，上海嘉定 201801摘要：介紹德令哈市新能源有軌電車線工程采用剩余電流式電氣火災探測器，就地組網方式，通過現場總線通訊遠傳至后臺，從而實現剩余電流式電氣火災監控系統的搭建，完成對現場配電回路的實時漏電流的監測。?關鍵詞：電氣火災；剩余電流式電氣火災監控探測器；監控系統；Acrel-6000/B；德令哈市新能源有軌電車線工程。?0 概述&