Application of Power Monitoring System in Adama I

時間：2021-05-21作者：安科瑞電子商務（上海）有限公司瀏覽：142

朱鹍
安科瑞電氣股份有限公司  上海嘉定



Abstract: Introduce the project of Adama industrial park, Ethiopia, which uses intelligent power meters to collect various electrical parameters and switch **s at the distribution site. The system adopts the method of on-site networking. After networking, it communicates via fieldbus and transmits it to the background. The Acrel-2000 power monitoring system realizes real-time monitoring and management of power distribution circuit power in the distribution room.
Keywords: intelligent power meter; Acrel-2000; power monitoring system


0 Demand analysis
To ensure the statistics and analysis of electricity load for production management and real-time monitoring of hazard sources. Real-time online monitoring of parameters such as voltage, current, and power in the incoming and outgoing circuits of the power distribution room at the project site is required. Once the monitoring point is monitored with abnormal parameters, it can detect and alarm in time, and relevant personnel can take necessary measures to avoid safety accidents. The automatic meter reading function saves manpower and material resources. The power trend curve function can intuitively display the working status and time of each circuit, which is convenient for users to find abnormal power circuits and make corrections in time, and establish a multi-level electrical energy measurement system to provide energy analysis basis .
Data collection
  Automatically collect analog data of all power meters on site, and automatically collect on-site switching data such as on-site switch status and fault status.
  Support real-time collection, automatic periodic collection (timing collection) configurable cycle (1 minute to 24 hours).
  Support data transmission correctness inspection, automatic processing of abnormal data.
  Support multi-threaded processing mechanism, improve the efficiency of data collection, and can collect data from multiple devices at the same time.
  The real-time data display adopts the intuitive display mode of the main wiring diagram of the distribution box, and the disconnection and fault status of each circuit switch are intuitively visible.
Data analysis and processing
  Comprehensive statistics and analysis of data need to achieve the following functions:
Statistics and calculation of the electricity consumption data of each equipment in hours, days, months, years and other time periods.
  Calculate the large, small and average value of the electrical load (active power, reactive power) of each device.
  Count the power consumption (active power and reactive power) of each substation and the whole.
Data query and display
  It is required to facilitate the realization of client query and query of managers at all levels. The query interface can adapt to the requirements of managers at all levels. It can support flexible condition combination query and comparative analysis.   Various types of statistical analysis data can be flexibly used in reports and other charts. Intuitive display function.
  According to the different permissions of different users, the data display function is divided into three layers: operation layer, management layer, and decision-making layer.
  The operation layer has functions such as energy consumption analysis, cumulative consumption, real-time monitoring, running records and ratios, comparison, and benchmarking analysis.
  The management has functions such as statistics and analysis of energy consumption data, comparison of classification and sub-items, and benchmarking analysis.
  The decision-making layer has functions such as energy data analysis, data deletion, and database import/export.
authority management
  It is required to assign different roles to different users, and be able to authorize function sub-menus, specific file records, data records, etc.
  The system requires a reasonable and complete user security control mechanism to protect the information resources in the application environment and prevent the loss, theft and destruction of information.
Energy-saving renovation and effect evaluation
  It is required to provide data support for the energy-saving transformation of production, and can provide the effect evaluation before and after the energy-saving transformation.
parameter settings
  The transformer ratio of each loop and the setting value of various current and voltage protection can be set through the acquisition cabinet.
  Fault judgment and alarm have automatic fault judgment and use sound and light alarm function. Alarm types include switch failures, voltage and current overruns, communication failures of the field acquisition module, and communication failures with the monitoring system. The alarm time is automatically recorded in the system database, which is convenient for users to inquire. The staff can grasp the real-time operation status of the substation at any time, find the operation failure of the substation and distribution, and make corresponding treatments, improve the management efficiency of the substation and distribution, and enhance the safety of the power system. reliability.

 

2 System solutions
1)  According to the actual situation of Adama industrial park, the overall network structure of Acrel-2000 system adopts shielded twisted pair to directly connect to the data collector and then directly connect to the monitoring host in the power distribution room through the network cable, ensuring the transmission of the power monitoring and monitoring system. The stability and real-time performance.
  The station control management layer is the direct window of human-computer interaction for the management personnel of the power monitoring system. In the Adama Project, it mainly refers to the monitoring host placed in the power distribution room on the first underground floor.
2）Network communication layer
The communication layer is mainly composed of collectors, Ethernet devices and bus networks. The main function of the serial server is to monitor on-site intelligent instruments; the main function of Ethernet equipment and bus network is to realize the data interaction between the substation and the main station, so that the management of the power distribution system is centralized, informatized, and intelligent, and the power distribution is improved. The safety, reliability and stability of the system have achieved the goal of unattended operation.
3）Field device layer
The field equipment layer is the data acquisition terminal, which is mainly composed of smart meters. The smart meters are connected to the communication server through the shielded twisted pair RS485 interface and the MODBUS communication protocol bus connection. The communication server reaches the monitoring host of the power distribution room for networking. Realize remote control.


System structure diagram

 

 

3 System functions
  The real-time monitoring system diagram of the substation is the main monitoring screen, which mainly monitors the operating status of all circuits in the substation in real time. Red represents closing and green represents opening. In the system diagram, you can intuitively see the operating parameters and status of each incoming and outgoing line, and you can see all the conventional power parameters on the outgoing side of the transformer, such as: three-phase voltage, current, active power, reactive power, and power factor , Frequency, active power, etc. As shown in the figure below:

primary system diagram


    
  The remote **ing and remote measurement alarm functions mainly complete the monitoring of the switch operation status of the low-voltage outlet circuits and the load incoming line. The pop-up alarm interface for switch displacement and load limit violations indicates the specific alarm location and sounds the alarm to remind the duty personnel to deal with it in time. The load limit can be set freely under the corresponding authority.
  The event alarm record function mainly completes the record of the alarm information and the occurrence time of the alarm information that occurred during the query time period, and provides the basis for the staff on duty and analyzes the cause of the accident, as shown in the following figure:


       Alarm function real-time query

 

  Parameter meter reading function, mainly to query the electrical parameters of the low-voltage outgoing circuit. Supports electrical parameter query at any time, with functions such as data export and report printing. This report queries the electrical parameters of the low-voltage circuits of the incoming and outgoing lines of the Adama power distribution room, mainly including: three-phase current, active power and active power. The name of each circuit in this report is associated with the database, which is convenient for users to modify the name of the circuit. As shown below:

           Parameter meter reading


  The power consumption report function can select the time period for query, supports the cumulative query of the power consumption at any time period, and has the functions of data export and report printing. Provide accurate and reliable electric energy report for the staff on duty. The name of each circuit in this report is associated with the database, which is convenient for users to modify the name of the circuit. As shown in the figure below, the user can print the report directly, and save it to another location in EXCEL format. As shown below:

Energy report


  A schematic diagram of the system communication structure, which mainly shows the network structure of the system. The system adopts a hierarchical distributed structure and monitors the communication status of the bay layer equipment at the same time. Red indicates that the communication is normal, and green indicates that the communication is faulty. The figure below is a schematic diagram of the communication status of the substation.

Communication structure diagram

 

4  Conclusion
  In the application of today’s power distribution facilities, the safety of the project’s power distribution is very important. The application of the Acrel-2000 power monitoring system in the Adama described in this article can realize the real-time power consumption of the power supply and distribution circuit in the power distribution room. Monitoring, not only can display the power status of the loop, but also has a network communication function, which can form a power monitoring system with a serial server, a computer, etc. The system realizes the analysis and processing of the collected data, real-time display of the operation status of the distribution circuits in the distribution room, pop-up alarm dialogs, voice prompts for load exceeding limit, and generates various electric energy reports, analysis curves, graphics, etc., which is convenient The remote meter reading, analysis and research of electric energy show that the system is safe, reliable and stable, providing a true and reliable basis for the project to solve the electricity problem, and has achieved good benefits.


Bibliography
1.Solutions For Enterprise Micro-grid System 2020.02

作者簡介：
朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向為企業能源管控
：@ 手機： QQ：



安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 淺談能耗在線監測系統助力用能單位做好降碳工作

  朱鹍安科瑞電氣股份有限公司 上海嘉定 201801?摘要：本文闡述了用能單位能耗在線監測系統的建設背景、思路、內容和架構，從為相關部門節能減排以及實現碳達峰、碳中和的目標提供數據支撐，論述系統建設的必要性。關鍵詞：能耗在線監測；節能減排；碳中和；碳達峰0背景? ? ? ?用能單位是指年綜合能源消費總量一萬噸標準煤以上的用能單位，以及**有關部門或

• 淺談高層住宅消防安全隱患分析及應對措施

  淺談高層住宅消防安全隱患分析及應對措施朱鹍安科瑞電氣股份有限公司 上海嘉定 201801?摘 要：我國的高層住宅具有建筑高度高、人員密集性、建筑結構復雜性的特點。在現在的高層住宅內，居住人員多且人員結構復雜，內部各種管道通路較多，一旦發生火災事故，救援的難度較大，*發生大規模的傷亡事故。所以高層住宅的消防安全工作就顯得十分必要。關鍵詞：高層建筑；消防安全；隱患；解決方法0引言 

• 安科瑞智能照明控制系統在新樂匯項目的設計與應用

  安科瑞智能照明控制系統在新樂匯項目的設計與應用朱鹍安科瑞電氣股份有限公司摘要：本文介紹大唐不夜城新樂匯項目，采用Acrel-BUS智能照明控制系統對全科醫生培養基地樓等公共部分照明回路的通斷進行智能控制，系統組網為KNX總線通訊，設計采用就地智能面板控制及通過IP網關接入Acrel-iLightControl智能照明控制系統，在計算機端集中控制與監控管理。?關鍵詞：公共建筑；智能照明控制

• 智能電動機保護控制器的應用與分析

  朱鹍安科瑞電氣股份有限公司 上海嘉定 201801? ? ? ? 分析了智能電動機保護器相比熱繼電器的優點，指出了在我公司成功應用的原因，提出了應用過程中需要注意的地方。? ? ? ? 公司新建一車間中，當工程設計到電動機保護這一部分時，設計者出于對熱繼電器保護性能的不滿意，決定采用一種新型的電動機保護電器來取代它。經